Below is the list of French TV Channels.
Some of them are free and others require a paid subscription which is needed to be taken directly with the TV service provider.
List Of French TV Channels
How Can I Watch France TV Channels From Abroad?
If you’re not in France, you’ll be blocked from accessing the TV channels due to broadcasting rights despite having an account with the TV providers.
Don’t worry, you can use a free Smart DNS service to bypass these restrictions and I will walk you through the easy setup as per below.
- Register for a free SmartDNS account
- Set up your device to use SmartDNS servers
- Watch French TV Channels from Abroad
Complicated? NO! Follow the easy steps below.
STEP 1: Register For A Smart DNS Account
To register, go to the Smart DNS Proxy website, enter your email address and click on Sign up now! button.
Next, enter your name, a password to register with Smart DNS Proxy and click on SUBMIT.
You should now be getting an email from Smart DNS Proxy to verify your email address.
In the email you’ve received, please click on VERIFY YOUR EMAIL.
You will now be redirected to your account’s page and you should be able to see your account status.
STEP 2: Smart DNS Proxy Setup
Next, please set up a Smart DNS proxy service on your device.
To do so, click on the (+) icon next to the system you’re using and follow the instructions.
Click on the Wifi/Internet icon at the bottom right-hand side of your taskbar and click on Network & Internet Settings.
In the next screen, please click on Change Adapter Options under Status page.
Right-click on your active network adapter (Local Area Connection or Wireless Network Connection) and select Properties.
Please Un-Check Internet Protocol Version 6 (TCP/IPv6) as the service doesn’t work over IPv6.
Next, double-click on Internet Protocol Version 4 (TCP/IPv4) or alternatively, you can select it and click on Properties.
In the General tab, click on Use the following DNS server addresses: and enter the DNS server addresses as per below:
- Prefered DNS Server: 220.127.116.11
- Alternate DNS Server: 18.104.22.168
When you’re done, click on OK.
Click on the Apple Logo located at the top left hand corner of your Mac and open System Preferences.
Navigate to Internet & Wireless and click on Network.
Select your active Internet Adapter (Wi-Fi if Wireless or Ethernet if Wired connection) and click on the Advanced button.
Select the DNS tab and click on the plus (+) button and enter the DNS server addresses as per below:
Note: You will need to click on the plus (+) button again to enter the second DNS server.
Click OK followed by the Apply button.
Choose Settings from Home screen.
Tap on Wi-Fi.
Find your Wireless connection (which has a tick or check mark) and click on the blue ‘i‘ icon.
You should now be in your Wi-Fi details page. At the Configure DNS section, tap on Automatic.
At the DNS configuration screen, tap on Manual and tap on the red (-) minus icon to remove your existing DNS address.
Now, tap on the (+) Add Server and enter the DNS server addresses as per below:
Note: You will need to click on the plus (+) button again to enter the second DNS server.
Once you’ve added two DNS servers as per the image above, tap on Save at the top right corner to save the settings.
For Android, you can use an app to configure your device easily. To do so, follow the steps below:
Once you’ve downloaded it, click on Install.
Next, Open the app and enter the following DNS servers as per below in the app and select START
- Primary Server: 22.214.171.124
- Secondary Server: 126.96.36.199
At the DnsChanger information, select OK.
When you see the Connection request message, select OK
If you see the Active status, you have configured your device. Next, just go to your home screen.
Note: If you no longer want to use the Smart DNS service, just tap on STOP.
Click the status area at the bottom of your screen, where your account picture is located.
Select Connected to … and take note of the network name.
Next, click on Settings…
On the Settings page, click on the network drop down menu and select your active Wi-Fi.
Now, click on the Network tab and select Custom name servers. Next, enter the DNS servers as per below in the two boxes.
Click Close to save your changes.
Go to your Terminal and type in sudo bash. This will give you super user privilege.
Once you have the superuser (administrator) access, type in the command below to back up your network configuration file.
cp /etc/resolv.conf /etc/resolv.orig
Next, type in the command below to remove the resolv.conf file.
Now, type in the command below one at a time.
- echo “nameserver 188.8.131.52” > /etc/resolv.conf
- echo “nameserver 184.108.40.206” >> /etc/resolv.conf
Finally, type in the command below to check if you’ve configured the DNS correctly.
If the set-up was successful, it will display the DNS addresses that you’ve specified earlier
Choose Settings from your Apple TV’s Main Screen.
Select on Network.
Select your network connection, Ethernet if you are connected via cable or Wi-Fi if you are using a wireless network.
Next, select Configure DNS.
By default, this should be set to Automatic. Change this to Manual.
Enter 054.229.171.243 as your DNS address and choose Done
From your Amazon Fire TV homescreen, navigate to Settings.
Head over to Device > About and select Network.
Take note of the IP Address and Gateway details as you will need this when setting up the connection.
Go back to the Settings page and select Network.
Select Configure Network if you are on a Wired connection or select your Wi-Fi network if you are connected wirelessly.
Note: The instructions below were based on a connection to a Wireless network, if you are on a Wired connection, please skip the wireless instructions.
If your Wifi network does not show up on this screen, please select See All Networks.
Next, forget the Settings of the Wireless network by pressing the Option button (3 lines) that can be found on your remote.
Select your Wi-Fi network again and once you’ve entered your password, click on Advanced.
The device network details that we need are the IP Address and Gateway that you note down earlier from the network About page.
IP address: Enter the IP address you noted down earlier.
Gateway: Enter the Gateway address you noted down earlier.
Network Prefix length: Enter 24
Enter the following DNS addresses accordingly. (one at a time)
DNS 1: 220.127.116.11
DNS 2: 18.104.22.168
Finally, select Connect to save the changes.
STEP 3: Check Smart DNS Configuration Status
Now that you’ve configured your device to use the Smart DNS, go to your Account and you should see green checkmarks next to DNS Setup and IP activation.
Note: If you didn’t get the green checkmarks, simply refresh the page.
That’s it! You can now access the supported TV Channels.
Cannot Download TV Apps on iPad / iOS / Apple TV / Android / Fire TV Stick?
Certain apps are geographically restricted and may not be available in the local app / play store.
To resolve this, follow the instructions at the link below:
Is Smart DNS Proxy Safe?
Absolutely! Most of the region-restricted websites have an initial location check, so a Smart DNS service route this request to their servers so you can bypass them.
This is a great service for Streaming as they only route the Internet traffic for the TV sites they support. Any other Internet traffic goes directly onto the Internet without Smart DNS service automatically.
Is Smart DNS Proxy Free?
You can use their service for 14 days for Free! They will not ask for your payment details and therefore, you will not be charged.
On the 14th day, you can either take a subscription with them or just don’t take any action. The free trial account will be automatically cancelled.
Personally, I would highly recommend their service because they support over 400+ TV channels and you can access it from anywhere in the world.
As low as $4 per month, their subscription is really cheap and it’s a good bargain.
This is also a great service for those who want to cancel their expensive cable TV subscription and look for a cheaper alternative.
Can I Use Smart DNS Service On Multiple Devices?
Yes! You can set up and use smart DNS service on any number of devices but they all need to be connected on the same network. i.e. Your home Wi-Fi connection.
For a Smart DNS service to work, you just need to activate your public IP address on their website and once you have done that, any devices connected to that network can use the service if the DNS servers are set on the device.
Smart DNS Proxy Stopped Working?
Unfortunately, whenever your public IP address changes, you will need to activate/update your IP.
To do so, login into your Account and click on Activate next to IP activation and you’re done.
Just to share, your IP address could have changed due to;
- You are connecting from a different network. (Other Wi-Fi / 4G)
- Your Internet connection got cut off momentarily.
- Internet router was rebooted.
- Your ISP made some changes or rebooted their system on their back end.
I am sure you don’t want to miss your favourite shows whilst being abroad and by using a Smart DNS service, you can get access to French TV from anywhere in the world!